Need for reinstalling Windows may be required for a number of reasons: damage to the data of the previous OS, the need to clean the computer, install updates, solve various problems, and so on. Consider in detail the nuances of this procedure.
Preparatory phase
Re-installation of Windows XP implies complete removal of data from the system disk. Therefore, you must first save all valuable documents. You can archive them and transfer them to removable media or download them to the cloud storage. All programs, saved passwords, personalization settings, license information and any other information will be erased. Their recovery in the future will be impossible, so the files must be saved. You also need to prepare a driver for the network adapter in advance if it is not embedded in the motherboard. Usually, installation discs report to devices of this type. But you can download the corresponding files from the Internet. Otherwise, such an option is possible that access to the Network will not be available for the PC.
Create boot disk
To create a boot disk, first of all, you need to find the Windows XP workpiece and download it to your computer. Further actions will vary depending on which media is scheduled to be recorded.
Option 1: USB flash drive
There are a large number of programs that can record the image of the OS on removable media. In this case, will be considered WinSetupFromUSB.
- Download the program to your computer at the link http://www.winsetupfromusb.com/files/download-info/winsetupfromusb-1-8-exe.
- Remove the image of the system in a convenient folder.
- Open WinSetupFromUSB- 1 – 8 .exe and select the path to extract.
- Go to the selected section and run the executable file based on the discharge of the current system.
- In section USB disc selection indicate the flash drive on which the assembly is scheduled to be recorded.
- Check next to the item in whose name there is XP.
- The button with three points is activated, press it.
- Specify the path to the folder with the retrieved image.
- Press GO and wait for the process to end.
Option 2: Optical Disk
UltraISO – A popular program for working with discs. With it, without problems, you can write the image of the system on a blockhead. To do this, follow this instruction:
- Download UltraISO at www.ezbsystems.com/ultraiso/download.htm
- Run the program, select the item “Tools”.
- In the context menu, click on “Record CD Image”.
- Indicate the location of the disk image as well as the removable media for recording.
- Confirm the selection and wait for the end of the bob.
PC setup
When the preparatory actions are finished, you can go directly to the preliminary setting of the computer. To start, paste the OS disc into the optical drive or connect the flash drive. Now you need to activate the PC boot not from the hard drive, but from the removable device. To do this, open BIOS. This is done when restarting the computer. As soon as the image appears on the screen, press the button many times Delete on the keyboard. If this does not work, then look at the inscription when you turn on the PC, there should be hints at the entrance to this mode. In BIOS, you should open the Boot tab and go to Boot Device Priority. In the menu that opens, you need to put a USB flash drive or disk in first place.
Then they will return to the start screen and exit while maintaining the settings (Save Changes).
The computer will reboot. After some time, the main part of the procedure will begin.Note: in most versions BIOS no muscle input. Use the arrows and other keyboard keys. But it may not work if connected via USB. In this case, you must connect the device with the PS / 2 connector.
Reinstallation Procedure
When the labels appear on the black background, select the installation item (keyboard arrows) and click Enter.
Now it remains just to follow the prompts on the screen. The process may seem complicated, but in reality everything is very clear. To begin with, accept the terms of the license agreement (button F8 on the keyboard). In our case, the Windows XP operating system is already available on the PC, the computer will offer to restore it. Need to refuse by clicking Esc.Now there is a selection of a system disk for installation.
Assign the one Windows previously stood on. There will be messages that it is undesirable to install two OSs in one section. Ignore this warning (button C).And here there is a choice: the first option is to leave all the data on the disk, including the system files, the second option is complete cleaning. It is advisable to use the last option, in which case the procedure will definitely be successful. It is preferable to choose the standard formatting method. It takes longer (approximately 10 minutes), but performs a complete cleaning of the HDD with the restoration of damaged sectors, if possible.
When the formatting procedure is completed, copying of system files will begin.
Then the computer will restart. Wait for the launch, then the installation will continue.
In the process, various windows with parameters will appear: setting the language, username, system revision, password, and so on.Note: a password will be required each time you reboot the PC or exit the user. But you can leave the field empty with it, then a secret combination will not be given. This will speed up the start of the computer.An easy way to reinstall Windows XP is described. Any user can cope with it without any problems. Just follow the instructions and recommendations from the article. On this procedure can be considered completed, only the first start and computer setup remains.
First launch
The first launch of the Windows XP will be longer than the following. At this time, the computer will configure various parameters, as well as apply settings. If a password has been set, it will be required to enter. The first thing to do is set the screen resolution. To do this, click PCM in an empty area on your desktop and select “Properties”. This item is changed in the section “Parameters”.
Then you need to update the driver and configure the PC as you wish.@top-advice.ru
